Chapter 7: Unsetting After An Alarm - Pyronix Enforcer User Manual

C H A P T E R 7 : U N S E T T I N G A F T E R A N A L A R M
 Enter your user code
Or
 Present a valid tag to the symbol
circled.
 The alarm symbol will flash indicating
there has been an alarm activation and
the keypad will display which input has
activated.
 Press A the key to reset the system
UNSETTING AFTER AN ALARM USING A WIRELESS KEYFOB
PLEASE NOTE: Unsetting with a keyfob will
only be allowed if your engineer has
enabled this.
 To unset via a keyfob. Press the
key
 The keyfob LED will start to flash
GREEN indicating that the system has
unset.
 Resetting the system after an alarm
can only be done at the keypad.
Page: 11