Automatic Door Opener - Gira 1288 00 Operating Instructions Manual

Automatic door opener

3 s
Hands-free feature and Comfort home station
The function "automatic door opener" is only supported by
the hands-free feature home station and the Comfort home
station with receiver.
The automatic door opener is, for example, used in doctor's
offices when after pressing a door-station call button, the
door opener is to be automatically operated. With the auto-
matic door opener activated, the door opener assigned to the
calling door station is operated approx. 4 seconds after the
door call is triggered. If several door stations are present in the
system, the automatic function automatically acts on the door
opener of the door station from which the door call was trig-
gered.
Before use, the automatic door opener must first be enabled:
Enabling/disabling "automatic door opener" function
1. Press the "System prog." button on the control device for
3 seconds to start programming mode (see Page 19).
2. Simultaneously press the buttons
station for approx. 3 seconds. By pressing these buttons
you can switch over the status of the automatic door
opener (enabled or disabled)
3 If the
LED lights up long for confirmation, the "auto-
matic door opener" function is enabled.
If the LED lights up short for confirmation, the "auto-
matic door opener" function is disabled.
3. Press the "Systemprogr." button on the control device to
exit the programming mode.
and on the home
25