Assigning Several Home Stations To A Call Button - Gira 1288 00 Operating Instructions Manual

Assigning several home stations to a call button

28
If several home stations are to be called simultaneously when
a door station call button is pressed, a call button can be
assigned to several (max. 3) home stations as follows:
1. Press the "System prog." button on the control device for
3 seconds to start programming mode (see Page 19).
2. Press the call button to which the home stations are to be
assigned at the door station for 3 seconds until you hear a
short acknowledgement tone.
3 You will hear a long acknowledgement tone.
3. Go to the first home station.
Press the
acknowledgement tone.
3 A long acknowledgement tone indicates successful
assignment.
Go to the door station and press the call button again for
3 seconds.
4. Go to the second (parallel) home station.
Press the
acknowledgement tone.
3 A long acknowledgement tone indicates successful
assignment.
5. Repeat Steps 4 and 5 to assign an additional parallel
home station to the call button.
6. Press the "Systemprogr." button on the control device to
exit the programming mode.
7. Carry out a function test.
button for 3 seconds until you hear a short
button for 3 seconds until you hear a short