Field
Description
Add an IP
Type the IP address of the remote host where you want log information sent and click Add. You
Address
can add multiple IP addresses using the Add button. Any IP address you add here appears in the
Select a logging destination drop-down list.
Select a logging
From the list, select the IP address to which you want the log information sent.
destination
Ping Test
Use this page to determine whether you can access an IP address from your computer.
Field or Button
Description
Enter IP Address to ping
Sets the IP address to ping; the default is the residential gateway default IP address
192.168.15.1.
Packet size
Sets the packet size of the ping test. The default is 64 bytes.
RSGu3502 — Tools
RSGu3502 — Tools
49