Connecting Your Rsgu3502 - Motorola RSGu3502 User Manual

Connecting Your RSGu3502

NOTES: At least one computer on your network must be connected to the RSGu3502 using an Ether-
net cable. Also, to prevent damage, only insert your SIM card with the power off.
RSGu3502
Power
Four-Port
Ethernet Router
Remove SIM card cover Insert SIM card
Port2:Phone2). Replace the door.
6 Connect a landline telephone.
7 Plug your cable or DSL modem back into an electrical outlet.
8 Connect the power adapter to the Power port on the rear panel of the RSG, and plug the other end into
an electrical outlet.
1 Shut down your computer and unplug your
cable or DSL modem power cord.
2 Disconnect your computer from the modem.
Do not disconnect your modem from the cable
or phone line that provides your Internet
connection.
3 Connect one end of the blue Ethernet cable to
the Ethernet port on your modem. Plug the
other end to the blue Ethernet port on the rear
panel of your residential gateway.
4 Connect one end of the yellow Ethernet cable
Cable or
DSL Modem to the yellow Ethernet port on your residential
gateway, and the other end of the cable to the
port on your computer.
Phone
Phone
5 Open the SIM slot and insert your card. (Note:
Place your SIM card and telephone in the
Internet
corresponding ports (SIM Port 1:Phone1/SIM
Connecting Your RSGu3502 9