Table of Contents
Advertisement
PB-2500J-PCIe/ CSM
3.2
PB-2500J-PCIe Installation in Nuvo-5000/ 7000 Series
PB-2500J-PCIe can be installed into Nuvo-5000 with A3 version PCBA daughter
board (please contact your distributor or Neousys Technology for details) and 7000
Series with NVBP-5000E PCBA daughter board by following the steps listed below.
For demonstration purposes, we will use Nuvo-5000 series as an example.
1. Place the controller up-side-down on a flat surface and unfastening the four
screws indicated below.
2. Lift the Cassette module gently to separate it from the controller.
24
Advertisement
Table of Contents
