For questions in regards to hardware/ software compatibility, customers should contact Neousys Technology Inc. sales representative or technical support. To the extent permitted by applicable laws, Neousys Technology Inc. shall NOT be responsible for any interoperability or compatibility issues that may arise when (1) products, software, or options not certified and supported;...
Neousys Technology Inc. (Taipei, Taiwan) 15F, No.868-3, Zhongzheng Rd., Zhonghe Dist., New Taipei City, 23586, Taiwan Tel: +886-2-2223-6182 Fax: +886-2-2223-6183 Email, Website Americas Neousys Technology America Inc. 3384 Commercial Avenue, Northbrook, IL 60062, USA (Illinois, USA) Tel: +1-847-656-3298Email, Website China Neousys Technology (China) Ltd.
This manual is intended to be used as an informative guide only and is subject to change without prior notice. It does not represent commitment from Neousys Technology Inc. Neousys Technology Inc. shall not be liable for any direct, indirect, special, incidental, or consequential damages arising from the use of the product or documentation, nor for any infringement on third party rights.
Safety Precautions Safety Precautions Read these instructions carefully before you install, operate, or transport the system. Install the system or DIN rail associated with, at a sturdy location Install the power socket outlet near the system where it is easily accessible ...
Service and Maintenance/ ESD Precautions Service and Maintenance ONLY qualified personnel should service the system Shutdown the system, disconnect the power cord and all other connections before servicing the system When replacing/ installing additional components (expansion card, memory module, etc.), insert them as gently as possible while assuring proper connector engagement ESD Precautions...
About This Manual About This Manual This manual introduces Neousys PCIe-PoE312M, a 4-port M12 x-coded server-grade Gigabit 802.3at PoE+ PCIe card, its setup and installation instructions. Revision History Version Date Description May. 2020 Initial release...
PCIe-PoE312M Introduction ntroducing Neousys PCIe-PoE312M, the world's first PCIe card with M12 x-coded connectors featuring Gigabit Ethernet and PoE+ functionality. Thanks to Neousys' patent-pending housing design, PCIe-PoE312M's M12 connectors utilizes a CNC-milled aluminum block as its connector housing screw that can withstand more than extra stress on the cable/ connector.
167.7 mm (D) x 111.2 mm (H) x 18.2 mm (W)* * PCIe-PoE312M is slightly thicker than a standard PCIe card and may cause mechanical interference with the card next to it. Please treat it as a dual-slot PCIe card and it is recommended to leave the following slot empty.
PCIe-PoE312M System Overview Upon receiving and unpacking your PCIe-PoE312M system, please check immediately if the package contains all the items listed in the following table. If any item(s) are missing or damaged, please contact your local dealer or Neousys Technology.
PCIe-PoE312M System Installation Before disassembling the system enclosure and installing components and modules, please make sure you have done the following: It is recommended that only qualified service personnel should install and service this product to avoid injury or damage to the system.
PCIe-PoE312M Configure Board ID for PCIe-PoE312M You can install multiple PCIe-PoE312M cards to your system and the card offers manual per-port power on/ off control. The on/ off control acts as a function that allows you to manually reset connected PoE+ PD devices via Neousys’ API. To support per-port on/ off control for multiple cards, you must set board IDs for each PCIe-PoE312M installed.
PCIe-PoE312M Configuring 12V DC Source PCIe-PoE312M requires 12V DC power and 9.6A maximum current for its PoE+ PSE function. By default, PCIe-PoE312M can obtain 12V DC directly from the motherboard’s PCI Express connector if the motherboard can supply enough amperage.
PCIe-PoE312M Installing PCIe-PoE312M PCIe-PoE312M utilizes the x4 PCI Express bus to communicate with the host computer. Before you install the PCIe-PoE312M, please make sure that there is a x4 PCI Express slot available on your host computer. NOTE Most modern computers have x16 PCI Express slot(s) for installing a graphics card.
Page 17
PCIe-PoE312M Align and insert the golden-finger connector of PCIe-PoE312M into the PCI Express slot. Secure the PCIe-PoE312M to finalize the installation.
Neousys provides a convenient utility in “Drivers & Utilities DVD” to allow the “One-Click” driver installation. This utility automatically detects your Windows operating system and installs corresponding driver for your PCIe-PoE312M with just one mouse click. 5.1.1 Install Driver Using “One-Click” Driver Installation Insert the “Drivers &...
PCIe-PoE312M 5.1.2 Install Drivers Manually You can also manually install drivers for PCIe-PoE312. Please refer to the following information about installing the driver for different operating system. Windows XP Execute x:\Driver_Pool\GbE_I350\XP\APPS\PROSETDX\XP2K3_32\DxSetup.exe , where x: denotes the volume of your DVD drive Windows 7 or Windows 8/8.1 32-bit...
PCIe-PoE312M Driver Settings PCIe-PoE312M offers the Gigabit Ethernet connectivity via Intel® I350 GbE controller. When connecting to a high-speed PoE device, such as a GigE camera, you can adjust some driver settings to have better transmission throughput and connection stability.
Page 21
PCIe-PoE312M Click Configure button and a property dialog appears. Click on the Advanced tab. Select the Jumbo Packet settings, and select the expected jumbo frame size. (for connecting a Ethernet device with high data rate, 9014 Bytes is suggested)
PCIe-PoE312M 5.2.2 Receive Buffer Receive buffer is another option which can affect data throughput. It determines the size of memory buffer allocated for receiving data. Increasing size of receive buffer can improve the performance of receiving data. The default settings of receive buffer is 256 bytes. When connecting to an Ethernet device that generates large amount of data, you can set this option to a larger value (maximal 2048 bytes) for better performance.
Page 23
PCIe-PoE312M Click Configure button and a property dialog appears. Click on the Advanced tab. Select the Performance Options settings and click the Properties button.
Page 24
PCIe-PoE312M Adjust the value of Receive Buffers. (for connecting a Ethernet device with high data rate, 2048 Bytes is suggested)
PCIe-PoE312M 5.2.3 Transmit Buffers Like receive buffer, transmit buffer can affect the performance of transmitting data. The default settings of receive buffer is 256 bytes. If you encounter a performance issue while transmitting data, you can adjust the size of transmit buffer to a larger value (maximal 2048 bytes) for better performance.
Page 26
PCIe-PoE312M Click Configure button and a property dialog appears. Click on the Advanced tab. Select the Performance Options settings and click the Properties button.
Page 27
PCIe-PoE312M Adjust the value of Transmit Buffers.
PCIe-PoE312M Appendix A Using Per-Port PoE On/Off Control PCIe-312M supports a unique feature of per-port power on/off control for each of its PoE ports. With provided function APIs, users can turn on or turn off the power of each PoE port manually for fault-recovery or device power reset purpose.
Page 29
(Trigger Fan-out Demo) * \Sample\DTIO_Demo (DTIO Demo) * \Sample\IGN_Demo (Ignition Control Demo) * \Sample\IVIS_DTIO_Demo (iVIS-200 DTIO Demo) * \Sample\POE_Demo (PoE per-port Control Demo) \Sample\PWM_Demo (PWM Control Demo) * \Sample\WDT_Demo (Watchdog Demo) * * These sample programs cannot work with PCIe-PoE312M...
Get the current power on/off status of designated PoE port. Description Parameter boardId DWORD value (0 ~ 7) to indicate board ID of selected PCIe-PoE312M card. Please refer to this section to configure the board ID. DOWRD value (1 ~ 4) to specify the PoE port.
Enable (turn on) PoE power for designated PoE port. Parameter boardId DWORD value (0 ~ 7) to indicate board ID of selected PCIe-PoE312M card. Please refer to this section to configure the board ID. DOWRD value (1 ~ 4) to specify the PoE port.
Description Disable (turn off) PoE power for designated PoE port. Parameter boardId DWORD value (0 ~ 7) to indicate board ID of selected PCIe-PoE312M card. Please refer to this section to configure the board ID. port DOWRD value (1 ~ 4) to specify the PoE port.