Pb-2500J-Pcie Installation In Nuvo-6000 Series; Removing Nuvo-6000 Chassis Cover - Neousys Technology PB-2500J-PCIe User Manual

3.1

PB-2500J-PCIe Installation in Nuvo-6000 Series

Prior to installing PB-2500J-PCIe into your Nuvo-6000 controller, please make sure
at least one PCIe slot is vacant for installation. Please follow the instruction below to
remove the enclosure for installation:
3.1.1

Removing Nuvo-6000 Chassis Cover

1. Loose four M3, F-head screws on the front, back and right side of the chassis.
2. Gently push the L-shape chassis cover toward top, then move it toward right to
remove the cover.
PB-2500J-PCIe/ CSM
20