Configuring Windows System - Neousys Technology PB-2500J-PCIe User Manual

PB-2500J-PCIe/ CSM
3.4

Configuring Windows System

Please make sure you've configured your Windows system to initiate a shutdown
process when pressing the power button. By default, Windows 7/ 8/ 10 goes to sleep
(S3) mode when the power button is pressed. As sleep (S3) is not a complete
shutdown behavior, PB-2500J will not recognize this command. To configure the
setting in your Windows system, go to "Control Panel > System and Security >
Power Options".
Set the "When I press the power button" configuration to "Shut down"
28