Update Parameters - Neousys Technology PB-2500J-PCIe User Manual

4.2.6

Update Parameters

Whenever you enter/ adjust a new parameter or parameters, for the new settings to
take effect, you must perform the following steps:
Click on the "Update Parameters" button and the following dialogue will appear.
1.
Click on yes, manually shutdown your system by going to "Start > Shut down".
2.
3. Once the system has shut down, unplug the 3-pin pluggable terminal block.
4. Wait for 5~10 seconds, plug in the 3-pin pluggable terminal block and start up
your system for the new settings to take effect.
PB-2500J-PCIe/ CSM
40