Table of Contents
Advertisement
1.2 Product Specification
1.2.1 Specification of PCIe-PoE354at
Bus Interface
Gigabit Ethernet Port
PoE Capability
Cable Requirement
Power Requirement
Operating Temperature
Dimension
* PCIe-PoE354at is designed to obtain 12 VDC for PoE devices from either PCI Express bus or
on-board 4-pin power connector according to a user-configurable jumper.
1.2.2 Specification of PCIe-PoE352at
Bus Interface
Gigabit Ethernet Port
PoE Capability
Cable Requirement
Power Requirement
Operating Temperature
Dimension
** PCIe-PoE352at is designed to obtained 12 VDC for PoE devices directly from PCI Express bus. No
external 12 VDC is needed.
Copyright © 2015 Neousys Technology Inc. All Right Reserved.
x4, Gen2 PCI Express
4x GigE ports by Intel® I350-AM4 controller,
supporting 9.5 kB jumbo frame, teaming and IEEE 1588
In compliant with IEEE 802.3at-2009 (PoE+)
Each port delivers up to 25.5 W of power
CAT-5e or CAT-6 cable, 100 meters maximal
Maximal 1.2 A @ 3.3 V from PCI Express bus
Maximal 9.6 A @ 12 V from PCI Express bus or on-board 4-pin power
connector*
0°C ~ 55°C with air flow
167.7 mm (W) x 111.2 mm (H)
x4, Gen2 PCI Express
2x GigE ports by Intel® I350-AM2 controller,
supporting 9.5 kB jumbo frame, teaming and IEEE 1588
In compliant with IEEE 802.3at-2009 (PoE+)
Each port delivers up to 25.5 W of power
CAT-5e or CAT-6 cable, 100 meters maximal
Maximal 0.9 A @ 3.3 V from PCI Express bus
Maximal 4.8 A @ 12 V from PCI Express bus**
0°C ~ 55°C with air flow
167.7 mm (W) x 111.2 mm (H)
PCIe-PoE354at/PCIe-PoE352at User's Manual
Page 6 of 31
Advertisement
Table of Contents
