Pcie-Poe425Bt Card Installation - Neousys Technology PCIe-PoE425bt User Manual

3

PCIe-PoE425bt Card Installation

Once you have set up the DIP switch ID of your PCIe-PoE425bt for multi-card installation, then you
are ready to install the PCIe-PoE425bt into the system. Please refer to the following installation
procedures.
Before disassembling the system enclosure and installing the card, please read the following
instructions:

DO NOT remove the card out of the anti-static bag until you are ready to install it into the
system.

It is recommended that only qualified service personnel should install and service this product
to avoid injury or damage to the system.

Please observe all ESD procedures at all times to avoid damaging the equipment.

Before disassembling your system, please make sure the system has powered off, all cables
and antennae (power, video, data, etc.) are disconnected.

Place the system on a flat and sturdy surface (remove from mounts or out of server cabinets)
before proceeding with the installation/ replacement procedure.
PCIe-PoE425bt
16