Service And Maintenance; Esd Precautions - Neousys Technology PB-2500J-PCIe User Manual

Service and Maintenance/ ESD Precautions

Service and Maintenance


ONLY qualified personnel should service the system

Shutdown the system, disconnect the power cord and all other connections
before servicing the system

When replacing/ installing additional components (expansion card, memory
module, etc.), insert them as gently as possible while assuring proper
connector engagement

ESD Precautions

 Handle add-on module, motherboard by their retention screws or the module's
frame/ heat sink. Avoid touching the PCB circuit board or add-on module
connector pins

Use a grounded wrist strap and an anti-static work pad to discharge static
electricity when installing or maintaining the system

Avoid dust, debris, carpets, plastic, vinyl and styrofoam in your work area.

Do not remove any module or component from its anti-static bag before
installation