Behavior For Dc Loss (<9V) - Neousys Technology PB-2500J-PCIe User Manual

4.2.2 Behavior for DC Loss (<9V)
Behavior for DC Loss (<9V) Settings
Auto
User-defined
Shutdown after _
seconds
NOTE
For new parameters to take effect, you must click on
follow procedure instructions. Please refer to the relevant section for details.
PB-2500J-PCIe/ CSM
If the "Auto" box is selected, the delay shutdown time will be
pre-determined by the MCU when you "Re-train" PB-2500J.
If the "User-defined Shutdown after _ seconds" is selected,
when the input voltage drops below 9V, the shutdown process
will be initiated by the user defined time in seconds.
36
"Update
Parameters" and