Table of Contents
Advertisement
3.3
PB-2500J-CSM Installation
PB-2500J-CSM consists of a PB-2500J-PCIe already installed in a Cassette module.
Please refer to the following instructions on how to install PB-2500J-CSM5 onto a
Nuvo-5000E/P systems or PB-25800J-CSM7 onto a Nuvo-7000E/P system.
1.
To install PB-2500J-CSM, turn your system upside-down and remove the
existing Cassette module.
2.
Gently lower the PB-2500J-CSM onto the system, matching the four (4)
Cassette module positioning poles and secure with four (4) screws.
3.
Connect using a DB9 female/ female COM-to-COM cable to connect the COM
port of PB-2500J-PCIe to the COM port of your controller. Secure both COM
ports. Please make sure the COM port is configured in RS-232 mode on the
host controller.
PB-2500J-PCIe/ CSM
Nuvo-5000E/ P Cassette module removal
Nuvo-7000E/ P Cassette module removal
27
Advertisement
Table of Contents
