Table of Contents
Advertisement
3.1.2
Installing PB-2500J-PCIe into Nuvo-6000 Controller
1.
Once the chassis has been removed, the 2x5 pin 2.0mm pitch wafer connecter
(indicated in orange), x4 PCI Express slot (indicated in blue) and the x16 PCI
Express slot (indicated in red) can be accessed.
2.
Connect the provided 2x5 pin 2.0mm pitch cable to the PCBA board of the
Nuvo-6000 controller.
3.
Align and insert the golden-finger connector of PB-2500J-PCIe into the PCI
Express slot until it's firmly seated.
PB-2500J-PCIe/ CSM
21
Advertisement
Table of Contents
