Neousys Technology PB-2500J-PCIe User Manual page 26

3. Align and insert the golden-finger connector of PB-2500J-PCIe into the PCI
Express slot until it's firmly seated.
4. Connect the 2x5 pin 2.0mm pitch cable onto the 2x5 pin 2.0mm pitch wafer
connector on PB-2500J-PCIe and secure the faceplate with a screw.
5. Place the Cassette module's cover back on and reinstall the Cassette module
onto the controller.
6. Use a COM-to-COM cable to connect the COM port of PB-2500J-PCIe to the
COM port of your controller. Secure both COM ports. Please make sure the
COM port is configured in RS-232 mode on the host controller.
PB-2500J-PCIe/ CSM
26