Test Mode - Elektron Analog Heat MKII User Manual

9. STARTUP MENU
To access this menu, hold down the [ACTIVE] key while powering up the Analog Heat. From here you can
perform a variety of tasks.

9.1 TEST MODE

To enter this mode, press the [AMP] key.
For testing purposes, a short sound is heard through all outputs of the Analog Heat.
If you have any trouble with your Analog Heat and suspect it may be due to a hardware problem, perform
this self-test. Use the PRESET/DATA knob to scroll through the test log. A fully functional device should not
report any errors. If it does report an error, please contact Elektron support or the retailer that you bought
your Analog Heat from.
9.2 EMPTY RESET
To perform an empty reset, press the [FILTER/EQ] key. This will reset the device and erase all presets.
9.3 FACTORY RESET
To perform a factory reset, press the [ENV] key. This will reset the device and overwrite preset 001–016
with factory presets. The remaining preset slots will be empty.
9.4 OS UPGRADE
Initiate the OS upgrade by pressing the [LFO] key. Analog Heat will enter a waiting stage, listening for
incoming OS data, and "READY TO RECEIVE" will be shown on the screen. For the transfer to be possible,
the device sending the OS syx file must be connected to the MIDI IN port of the Analog Heat. To send the
OS syx file, use our free SysEx utility software C6. The OS syx file and the C6 software can be downloaded
from the Elektron website.
• You cannot use the Elektron Transfer software to transfer OS syx files when you are in the
STARTUP MENU.
• USB MIDI transfer is not possible when you want to upgrade the OS from the STARTUP
MENU.
On your computer, download the OS syx file, open the C6 software. Click CONFIGURE and select Analog
Heat for MIDI In as well as MIDI Out. Drag the syx file to the C6 main window, then highlight it clicking on it
with the mouse pointer. Point and click on the "send" button in the top left corner of the C6 window.
As the Analog Heat receives the OS, a progress bar will show how much of the OS has been received.
When the transfer is finished the message "UPGRADING... DO NOT TURN OFF" appears. Please note that
the upgrade takes a little while. The device will restart when the upgrade process is finished.
• When you send the OS syx file, use our free Elektron C6 software. You can download it
from the Elektron website.
• If the Analog Heat receives the OS upgrade through the MIDI ports, you can use the Elek-
tron TM-1 USB MIDI interface for up to 10x transfer speeds.
9. STARTUP MENU
27