The User Interface; Presets; Active Mode; Effect Circuits - Elektron Analog heat Quick Manual

Stereo analog sound processor

Table of Contents

5. THE USER INTERFACE

The Analog Heat has 128 preset slots where you can store your presets. Preset slot 000 is an INIT

preset with default values. Note that, when switching off the power to your Heat, any changes to the

currently active preset will be lost unless the preset is first saved. There is an indicator (next to the

preset number) on the LCD screen showing when changes have been made to the preset. For more

information, please see "5.12 LCD SCREEN TITLE BAR" on page 20.

LOADING A PRESET

1. Turn PRESET/DATA to select a preset.

2. Press PRESET/DATA or [YES] to load the preset.

SAVING A PRESET

1. Press and hold PRESET/DATA for two seconds. The selected preset now starts to blink to illus-

trate that you are about to overwrite the preset position.

2. Turn PRESET/DATA to select the preset slot to where you want to save your sound, and then

press [YES].

3. Turn PRESET/DATA to the character you wish to edit. Press and hold [SETTINGS] and then turn

PRESET/DATA to move the cursor to the desired character and select it by releasing [SET-

TINGS]. To delete a character, turn PRESET/DATA to move the cursor to highlight the character

after the one you wish to delete, then press and hold [SETTINGS] and press [NO] twice.

4. Press [YES] to save the preset.

Active Mode is toggled on and off by pressing [ACTIVE]. If the Analog Heat is not in Active Mode,

the effect is bypassed. The <ACTIVE> LED indicates if the effect is active or not. You can also use a

Footswitch to toggle the Active Mode. You also have the option to set if you want the Analog Heat to

start in active mode or not when you turn it on.

You can use the CIRCUIT SELECTOR to choose between 8 different types of effect circuits for a wide

variety of drive and distortion sounds.

•

CLEAN BOOST

Makes the signal louder. When fully driven, it sounds similar to overdriving old mixers. Use for mini-

mal distortion or when you only want to use the filter and EQ.

Table of Contents

Analog heat