Signal Flow; Audio Signal Flow; Modulation Signal Flow; The User Interface - Elektron Analog Heat MKII User Manual

4. SIGNAL FLOW

4. SIGNAL FLOW
The illustrations below show the signal flows of the Analog Heat and illustrates how the different compo-
nents interact with each other.

4.1 AUDIO SIGNAL FLOW

This illustration shows the general flow of audio through the Analog Heat. The complete signal chain is in
stereo.
Drive
In L/R
Input
Sensitivity

4.2 MODULATION SIGNAL FLOW

This illustration shows the flow of how modulation signals are generated and routed through the
Analog Heat.
Over-
bridge
In L/R
Input
Sensitivity

5. THE USER INTERFACE

5.1 PRESETS

The Analog Heat has 128 preset slots where you can store your presets. Preset slot 000 is an INIT preset
with default values. Note that, when switching off the power on your Heat, any changes to the currently
active preset will be lost unless the preset is first saved. There is an indicator (next to the preset number)
on the LCD screen showing when changes have been made to the preset. For more information, please see
"5.12 LCD SCREEN TITLE BAR" on page 14.

5.1.1 LOADING A PRESET

1. Turn PRESET/DATA to select a preset.
2. Press PRESET/DATA or [YES] to load the preset.
12
Circuit
Dirt
Effect
Wet level
Bandpass Envelope
Filter Follower
Gain
Modulation
Multi-mode
Equalizer
Filter
Bypass
Dry/Wet Preset
Mix Volume
Overbridge
Trig
Compar-
ator
Filter Modulation
Destination
Out L/R
Master
Head-
Volume
phones
Filter
Modulation
Modulation
LFO
Destination
Modulation
Envelope
Generator Destination
Filter
Modulation