Startup Menu; Test Mode; Empty Reset; Factory Reset - Elektron Analog Heat +FX User Manual

9. STARTUP MENU

To access this menu, hold down the [ACTIVE] key while powering up the Analog Heat +FX. From here you
can perform a variety of tasks.

9.1 TEST MODE

To enter this mode, press the [FLOW] key.
Remember to turn down the volume on all speakers and headphones before activating Test
mode. For testing purposes, a short sound is heard through all outputs of the Analog Heat
+FX.
If you have any trouble with your Analog Heat +FX and suspect it may be due to a hardware problem, per-
form this self-test. Use the NAVIGATION knob to scroll through the test log. A fully functional device should
not report any errors. If it does report an error, please contact Elektron support or the retailer that you
bought your Analog Heat +FX from.

9.2 EMPTY RESET

To perform an empty reset, press the [HEAT] key. This will reset the device and erase all presets.

9.3 FACTORY RESET

To perform a factory reset, press the [FX] key. This will reset the device and overwrite preset 001–016 with
factory presets. The remaining preset slots will be empty.

9.4 OS UPGRADE

Initiate the OS upgrade by pressing the [MOD] key. Use this menu option if you for some reason cant
upgrade the Analog Heat +FX OS using the standard procedure in the SYSTEM menu. To send the OS
file, use our free Elektron Transfer software. The Elektron Transfer can be downloaded from the Elektron
website.
1. Download the Analog Heat +FX OS file from the Elektron website.
2. Connect the Analog Heat +FX's MIDI IN port to the MIDI OUT port of the computer's MIDI interface.
3. Hold down the [ACTIVE] key while powering on Analog Heat +FX. This takes you to the STARTUP
menu.
4. Press the [MOD] key to enter OS UPGRADE mode.
5. Open the Transfer application on your computer. On the Transfer CONNECTION page, click "go to the
SYSEX TRANSFER page".
6. On the SYSEX TRANSFER page, click "OS Upgrade via device startup menu", and then follow the on-
screen instructions.
When the update is done, the Analog Heat +FX will reboot.
USB MIDI transfer is not possible when upgrading the OS from the STARTUP menu.
9. STARTUP MENU
39