Download Print this page
Elektron Octatrack Quick Start Manual
Elektron Octatrack Quick Start Manual

Elektron Octatrack Quick Start Manual

8-track performance sampler

Advertisement

Quick Links

QUICKSTART GUIDE: OCTATRACK
This quick start will guide you through some of the basic operations to allow you to start
using the Octatrack right away. Please visit www.elektron.se for Octatrack tutorial videos.

DEMO MODE

While in this mode the Octatrack will be able to play back a set of 16 demo
patterns without the need to have a Compact Flash card inserted.
1. Make sure no Compact Flash card is inserted. Switch on the Octatrack while
keeping the [YES] button ( ) pressed. The
mode is being entered.
If the Octatrack is in demo mode, switched o and then booted with a
Compact Flash card inserted, you will have to mount a set and a project.
Please see the Octatrack manual p. 16 for more info how to do this.
PLAYING THE DEMO PATTERNS
The demo patterns range from pattern 01 to pattern 16.
1. After demo mode has been accessed, press [PLAY] ( ) to start playing
pattern 01.
screen will state that demo
2. Select pattern
[PATTERN] + [TRIG] key 2 ( ). Pattern
[PATTERN] + [TRIG] key 3.
Please note that the VOLUME ( ) knob only a ects the volume for the
Headphones output. Press [FUNCTION] ( ) + turn the LEVEL ( ) knob
to change the volume of the main outputs.
 Mute tracks by pressing [FUNCTION] + the [TRACK] ( ) button of
the track you want to mute.
Please visit www.elektron.se for tutorial videos.
02, which is the second demo pattern, by pressing
03 is selected by pressing

Advertisement

loading

Summary of Contents for Elektron Octatrack

  • Page 1: Demo Mode

    DEMO MODE PLAYING THE DEMO PATTERNS While in this mode the Octatrack will be able to play back a set of 16 demo The demo patterns range from pattern 01 to pattern 16. patterns without the need to have a Compact Flash card inserted.
  • Page 2 TRACK PARAMETER PAGE parameters to experiment with the sound shaping possibilities. 4. Select a sample and press [ENTER/YES] ( ) to assign it to the machine. 5. To revert the parameter settings to their original state, press [FUNCTION] + [CUE] ( ). Please visit www.elektron.se for tutorial videos.