Midi; Sync; Port Config - Elektron Analog Heat MKII User Manual

6. THE SETTINGS MENU

6.5 MIDI

These settings are stored in the global settings and are not part of the preset.

6.5.1 SYNC

• CLOCK RECEIVE
Sets whether or not the Analog Heat responds to MIDI clock and transport sent from external devices.
(ON, OFF)
• CLOCK SEND
Sets whether or not the Analog Heat sends/forwards MIDI Clock and transport. Transport is transmit-
ted when an external clock source (MIDI or Overbridge) is used. (ON, OFF)
• PROG CHG RECEIVE
Sets whether or not the Analog Heat responds to incoming program change messages. This is useful
when wanting to select presets from an external source For more information on how to select the
appropriate MIDI channel please see "6.5.3 CHANNELS" on page 19. (ON, OFF)
• PROG CHG SND
Sets whether or not the Analog Heat sends program change messages when it changes patches. For
more information on how to select the appropriate MIDI channel, please see "6.5.3 CHANNELS" on
page 19. (ON, OFF)

6.5.2 PORT CONFIG

• TURBO SPEED
This setting allows Turbo mode negotiation between Elektron gear. Connecting the Analog Heat to
other Turbo protocol compatible gear, like the Analog Rytm and the Octatrack, makes it possible to
increase the average MIDI bandwidth by up to 10x. This increases the accuracy of MIDI clock signals
as well as the timing of CC messages. (ON, OFF)
• OUT PORT FUNC
Sets what type of signal the MIDI OUT port sends.
• MIDI sets the port to send MIDI data.
• DIN24 sets the port to send DIN 24 sync pulses. No MIDI data can be sent on the port when this
option is selected.
• DIN48 sets the port to send DIN 48 sync pulses. No MIDI data can be sent on the port when this
option is selected.
• THRU PORT FUNC
Sets what type of signal the MIDI THRU port sends. The settings are the same as for OUT PORT
FUNC.
• INPUT FROM
Sets the source from which the Analog Heat receives MIDI data.
• MIDI Only receives MIDI data from the MIDI IN port.
• USB Only receives MIDI data from the USB port.
• MIDI+USB Receives MIDI data from both the MIDI IN and USB port.
• NONE Disregards any incoming MIDI data.
• OUTPUT TO
Selects the port to which Analog Heat sends MIDI data (CC or NRPN).
• MIDI Only sends MIDI data to the MIDI OUT port.
• USB Only sends MIDI data to the USB port.
• MIDI+USB Sends MIDI data to both the MIDI OUT and USB port.
• NONE Do not send MIDI data to any port.
• PARAM OUTPUT
Sets what type of MIDI messages the DATA ENTRY knobs sends. For information
about which CC/NRPN parameters that are sent, please see "APPENDIX A: MIDI" on page 29.
• CC Sets the knobs to send CC MIDI messages.
• NRPN Sets the knobs to send NRPN MIDI messages.
• ENCODER DEST
Sets whether or not the DATA ENTRY and LEVEL knobs send MIDI data.
• INT MIDI only sends data internally.
• INT + EXT MIDI sends data both internally and externally.
18