Mode - Elektron Analog Heat MKII User Manual

7. PARAMETER PAGES

7.4.1 MODE

Sets the mode of the envelope follower. Keep turning the knob to access the next mode. The higher
the value under the selected mode, the more gain is added to the signal, which is useful for weak input
signals.
• AR (Attack-Release)
Creates an envelope control signal where the Attack phase begins when the incoming sound exceeds
the threshold. The envelope then holds until the incoming sound falls under the threshold and the
release phase starts
• AD (Attack-Decay)
Creates an envelope control signal where the Attack phase begins when the incoming sound exceeds
the threshold and is then followed directly by the decay phase.
• FLW (Follow)
The envelope follows the amplitude of the input signal when it is above the threshold level.
7.4.2 ATK
In Follow (FLW) mode, this is the rise time of the envelope follower, i.e. how quickly the follower rises
when the amplitude of the audio increases. In generator mode (AD or AR), this is the attack time of the
generated envelope. The rise time of the underlying envelope follower is set to fastest possible rise time
in these configurations. (0–127)
22
Envelope
control signal
Attack
Trig
Audio signal
TIME
Envelope
control signal
Attack
Trig
Audio signal
TIME
Envelope
control signal
Audio signal
Trig
TIME
Release
Decay