Table of Contents
Advertisement
9. STARTUP MENU
9. STARTUP MENU
To access this menu, hold down the [ON] key while powering up the Analog Heat MKII. From here you can
perform a variety of tasks.
9.1 TEST MODE
To enter this mode, press the [AMP] key.
Remember to turn down the volume on all speakers and headphones before activating Test
mode. For testing purposes, a short sound is heard through all outputs of the Analog Heat
MKII.
If you have any trouble with your Analog Heat MKII and suspect it may be due to a hardware problem,
perform this self-test. Use the PRESET/DATA knob to scroll through the test log. A fully functional device
should not report any errors. If it does report an error, please contact Elektron support or the retailer that
you bought your Analog Heat MKII from.
9.2 EMPTY RESET
To perform an empty reset, press the [FLTR & EQ] key. This will reset the device and erase all presets.
9.3 FACTORY RESET
To perform a factory reset, press the [ENV] key. This will reset the device and overwrite preset 001–016
with factory presets. The remaining preset slots will be empty.
9.4 OS UPGRADE
Initiate the OS upgrade by pressing the [LFO] key. Analog Heat MKII will enter a waiting stage, listening for
incoming OS data, and "READY TO RECEIVE" will be shown on the screen. For the transfer to be possible,
the device sending the OS syx file must be connected to the MIDI IN port of the Analog Heat MKII. To send
the OS syx file, use our free SysEx utility software C6. The OS syx file and the C6 software can be down-
loaded from the Elektron website.
USB MIDI transfer is not possible when you upgrade the OS from the STARTUP MENU.
On your computer, download the OS syx file, open the C6 software. Click CONFIGURE and select the de-
vice you want to use to transfer the syx file (usually your sound card) for MIDI In as well as MIDI Out. Drag
the syx file to the C6 main window, then highlight it by clicking it with the mouse pointer. Press "Send" in the
top left corner of the C6 window.
As the Analog Heat MKII receives the OS, a progress bar will show how much of the OS has been received.
When the transfer is finished the message "UPGRADING... DO NOT TURN OFF" appears. The device will
restart when the upgrade process is finished.
• When you send the OS syx file, use our free Elektron C6 software. You can download it
from the Elektron website.
• If your computer OS does not support C6, we suggest to use SysEx Librarian instead.
• If the Analog Heat MKII receives the OS upgrade through the MIDI ports, you can use the
Elektron TM-1 USB MIDI interface for up to 10x transfer speeds.
32
Advertisement
Table of Contents
