Picture Address; Output Select - StarTech.com VID2HDMITV Instruction Manual

VID2HDMITV.qxp 9/13/2006 2:40 PM Page 4
4
Picture Adjust
Use the +,- buttons to move the cursor to the desired parameter. Press the MENU
button to confirm your selection. At this point, the selected parameter will turn red, and
you can use the +,- buttons to increase or decrease the value of the parameter. Once
the necessary adjustments have been made, Press the MENU button to apply the
change.

Output select

When selected, this menu will allow you to change the output resolution of the display:
Use the +,- buttons to move the cursor to the desired resolution/refresh rate. Press the
MENU button to confirm your selection. Please note: Selecting a resolution/refresh rate
that is not supported by your display, may damage the display. Please consult the
documentation that accompanied the display unit at the time of purchase.