Preface; Audience; Conventions; Text Conventions - Extreme Networks ExtremeSwitching 210-12t-GE2 Hardware Installation Manual

Preface

This guide provides the instructions and supporting information needed to install the following Extreme
®
Networks products:
•
210 Series switches:
•
ExtremeSwitching 210-12t-GE2 switch
•
ExtremeSwitching 210-12p-GE2 switch
•
ExtremeSwitching 210-24t-GE2 switch
•
ExtremeSwitching 210-24p-GE2 switch
•
ExtremeSwitching 210-48t-GE4 switch
•
ExtremeSwitching 210-48p-GE4 switch
•
220 Series switches:
•
ExtremeSwitching 220-12t-10GE2 switch
•
ExtremeSwitching 220-12p-10GE2 switch
•
ExtremeSwitching 220-24t-10GE2 switch
•
ExtremeSwitching 220-24p-10GE2 switch
•
ExtremeSwitching 220-48t-10GE4 switch
•
ExtremeSwitching 220-48p-10GE4 switch
The guide includes information about site preparation, switch functionality, and switch operation.

Audience

This guide is intended for use by network administrators responsible for installing and setting up
network equipment. It assumes a basic working knowledge of:
•
Local area networks (LANs)
•
Ethernet concepts
•
Ethernet switching and bridging concepts
•
Routing concepts
•
SNMP (Simple Network Management Protocol)
•
Basic equipment installation procedures
Note
If the information in an installation note or release note shipped with your Extreme Networks
equipment differs from the information in this guide, follow the installation or release note.

Conventions

This section discusses the conventions used in this guide.

Text Conventions

The following tables list text conventions that are used throughout this guide.
ExtremeSwitching 210 and 220 Series Switches: Hardware Installation Guide 5