Chapter 2: External Power Supplies; Rps-150Xt Redundant Power Supply - Extreme Networks ExtremeSwitching 210-12t-GE2 Hardware Installation Manual

2
External Power Supplies

RPS-150XT Redundant Power Supply

RPS-500p Redundant Power Supply
Installing External Power Supplies
Some ExtremeSwitching 220 switch models can use an external power supply to help ensure
redundancy. The following external power supplies are available:
•
RPS-150XT Redundant Power Supply
•
RPS-500p Redundant Power Supply
External power supplies are supported as follows:
Table 4: External Power Supplies Supported for 220 Series Switches
Switch Model
220-24t-10GE2
220-24p-10GE2
220-48t-10GE4
220-48p-10GE4
For instructions on attaching your switch to an external power supply, see
Supplies on page 28.
RPS-150XT Redundant Power Supply
The RPS-150XT provides backup power to Extreme Networks stackable switches. If for some reason the
switch loses power from its internal power supply, the RPS-150XT can provide up to 150 W maximum
operating power to support switch operation.
The power supply ships with the following:
•
RPS cable
•
Four rubber feet (for flat surface installation)
The RPS-150XT is compatible with the following Extreme Networks switches:
•
ExtremeSwitching X440-G2-24t-10GE4 switch
•
ExtremeSwitching X440-G2-24x-10GE4 switch
•
ExtremeSwitching X440-G2-48t-10GE4 switch
•
ExtremeSwitching X440-G2-24t-10GE4-DC switch
•
ExtremeSwitching X440-G2-48t-10GE4-DC switch
•
ExtremeSwitching X440-G2-12t8fx-GE4 switch
•
ExtremeSwitching X440-G2-24fx-GE4 switch
ExtremeSwitching 210 and 220 Series Switches: Hardware Installation Guide
on page 25
on page 27
RPS-150XT
yes
yes
RPS-500p
yes
yes
Installing External Power
25