Extreme Networks ExtremeSwitching 210-12t-GE2 Hardware Installation Manual page 62

•
To view the network information, enter show network
•
To save these changes so they are retained during a switch reset, enter the following command:
copy system:running-config nvram:startup-config
For details, see the
After the switch is connected to the network, you can use the IP address for remote access to the switch
by using a web browser or through Telnet or SSH.
ExtremeSwitching 210 and 220 Series Switches: Hardware Installation Guide
ExtremeSwitching 200 Series Switches Administration
Basic Configuration for Your Switch
Guide.
62