Extreme Networks ExtremeSwitching 210-12t-GE2 Hardware Installation Manual page 61

6 Optionally, open the web interface.
a Open a web browser and enter the IP address of the switch in the browser's address field.
b Type the user name and password into the fields on the login screen, then click Login.
The user name and password are the same as those you use to log on to the command-line
interface. By default, the user name is admin, and there is no password. Passwords are case
sensitive.
c After a successful login, the System Description window opens.
7 Using either the web interface or the command line, configure network information as needed.
If the unit has a service port:
•
To have the address assigned through DHCP:
By default, the port is configured as a DHCP client. If your network has a DHCP server, then you
need only to connect the switch to your network.
•
To use BootP, change the protocol by entering: serviceport protocol bootp
•
To disable DHCP/BootP and manually assign an IPv4 address, enter:
serviceport protocol none
serviceport ip ipaddress netmask [gateway]
For example:
serviceport ip 192.168.2.23 255.255.255.0 192.168.2.1
•
To disable DHCP/BootP and manually assign an IPv6 address and (optionally) default gateway,
enter:
serviceport protocol none
serviceport ipv6 address ipaddress/prefix-length [eui64]
serviceport ipv6 gateway gateway
•
To view the assigned or configured network address, enter:
show serviceport
If the unit does not have a service port:
•
To use a DHCP server to obtain the IP address, subnet mask, and default gateway information,
enter:
network protocol dhcp
•
To use a BootP server to obtain the IP address, subnet mask, and default gateway information,
enter:
network protocol bootp
•
To manually configure the IPv4 address, subnet mask, and (optionally) default gateway, enter:
network parms ipaddress netmask [gateway]
For example:
network parms 192.168.2.23 255.255.255.0 192.168.2.1
•
To manually configure the IPv6 address, subnet mask, and (optionally) default gateway, enter:
network ipv6 address ipaddress/prefix-length [eui64]
network ipv6 gateway gateway
ExtremeSwitching 210 and 220 Series Switches: Hardware Installation Guide
Basic Configuration for Your Switch
61