Extreme Networks ExtremeSwitching 210-12t-GE2 Hardware Installation Manual page 33

Figure 30: Attaching the Rack-Mounting Brackets
1 = Rack-mounting brackets (2)
2 With the rack-mounting brackets attached, position the RPS-500p between the vertical rack rails of
the 19-inch rack as shown in
Figure 31: Fastening the RPS-500p to the Rack
1 = RPS-500p
2 = Rails of 19-inch rack
3 Fasten the RPS-500p securely to the rack rails using four customer-supplied rack screws.
ExtremeSwitching 210 and 220 Series Switches: Hardware Installation Guide
2 = M3x6mm flathead screws (8)
Figure 31.
3 = Mounting screws (4)
External Power Supplies
33