Standards And Approvals - Siemens SIMATIC S7-1500 System Manual

Technical specifications

15.1 Standards and Approvals

15.1 Standards and Approvals
Currently valid markings and authorizations
Note
Details on the components of the S7-1500 automation system/ET 200MP distributed
I/O system
The currently valid markings and approvals are printed on the components of the S7-1500
automation system/ET 200MP distributed I/O system.
Safety information
Personal injury and damage to property may occur
In hazardous areas, injury to persons and material damage may occur if you disconnect
plug-in connections during operation of an S7-1500 automation system/ET 200MP
distributed I/O system.
Always switch off the power to the S7-1500 automation system/ET 200MP distributed
I/O system when disconnecting plug-in connections in hazardous atmospheres.
Explosion hazard
If you replace components, compliance with Class I, DIV. 2 could be compromised.
Deployment requirements
This device is only appropriate for use in Class I, Div. 2, Group A, B, C, D, or in
non-hazardous areas.
206
WARNING
WARNING
WARNING
Automation system
System Manual, 12/2014, A5E03461182-AC