Connecting Interfaces For Communication - Siemens SIMATIC S7-1500 System Manual

Wiring

5.7 Connecting interfaces for communication

Reference
Further information about connecting the 24 V DC output voltage of the load voltage supply
modules is available in the manuals of the corresponding modules.
5.7 Connecting interfaces for communication
Connecting interfaces for communication
The communication interfaces of the CPU/interface module are connected using
standardized connectors.
Use prefabricated connecting cables for the connection. If you want to prepare
communication cables yourself, the interface assignment is specified in the manuals of the
corresponding modules. Observe the mounting instructions for the connectors.
64
Automation system
System Manual, 12/2014, A5E03461182-AC