Wiring Front Connectors For I/O Modules Without Shield Contact Element - Siemens SIMATIC S7-1500 System Manual
Automation system
Hide thumbs
Also See for SIMATIC S7-1500:
- Function manual (402 pages) ,
- System manual (393 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
5.8.1
Wiring front connectors for I/O modules without shield contact element
Requirements
● The I/O modules are installed on the mounting rail.
● The supply voltages are turned off.
● The wires are prepared according to the utilized clamping technology, take the wiring
rules (Page 59) into account for this purpose.
Tools required
● Stripping tool
● 3 to 3.5 mm screwdriver
Automation system
System Manual, 12/2014, A5E03461182-AC
5.8 Front connector for the I/O modules
Wiring
67
Advertisement
Table of Contents
