Descrip I N T O Bus Nexa Con Ector; Con E N Ction Illumination Module - golmar Plus Nexa Instruction Manual

DOOR PANEL INSTALLATION
D
escription CN8 Bus Nexa connector.
The connector CN8 Bus Nexa is located at the upper left side of the back of
the sound module.
Insert the connection cable that it is supplied with the module in the CN8
connector of the sound module and the other end of the connection cable
in the module with connector Bus Nexa.
The modules to connect with connector Bus Nexa are the next :
N3403/AL: Con ect
ð
panel, see
TCode/CD Nexa
N3301/AL: Con ect
ð
coded panel, (see
N3301A/AL: Co nect
ð
TCode/CD Nexa manual).
EL4502/NFC: Co nect
ð
manu l a
TCode/C
EL3002: Con ect n
ð
CD-NEXA/BT: Con ect
ð
(wireless device of 2,4 Ghz). Only for
C
on nection with EL3002 illumination modules
NOT : E Only the EL632 Plus P/T
supply The EL3002 illumination module take the power through Bus Nexa connection cable .
(once the Bus Nexa connection cable has been connected in the sound module).
n to the m dul o e to add to the system with a graphic display module (coded
manual) .
n to the module to add to the system with an access control module and
manual)
TCode/CD Nexa
n to the module to add to the system with an alphabetic module, (see
n to the module to add to the system with
) .
A NFC Nexa
to power the illumination module
n to the module to add to the system with a configuration RFC interface
N3301
or EL642 Plus
.
an NFC access
(M xim a um EL3002 modules 2
and N3403 modules .
.
Insert the Bus Nexa connection cable that it is
supplied with the product in the CN8
connector of the sound module and the
other end of the connection cable in any of
the three connectors placed at the bottom of
the EL3002 illumination module.
To connect to other illumination modules use
any of the two free connectors.
sound module must be connected to power
83
control ( see
).
,