Convenient Functions; Loading/Saving Piano Setups; Saving Piano Settings (Piano Setup Export); Loading Piano Settings (Piano Setup Import) - Roland LX708 Owner's Manual

° Convenient Functions

Loading/Saving Piano Setups

You can save your own piano settings in a USB flash drive, or load
them into the other digital piano.
* Settings can be loaded only into another piano of the same
model.
Settings that are saved
Setting Page
Speaker volume p. 6
Headphone volume p. 7
Ambience p. 16
Key Touch p. 16
Brilliance
p. 16
Master Tuning p. 16

Saving Piano Settings (Piano Setup Export)

1.
Connect your USB flash drive to the USB Memory
port.
2.
Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
3.
Turn the [ ] knob to access "Piano Setup Export"
screen, and then press the [ ] knob.
The Piano Setup Export screen appears.
4.
Rename the piano settings.
Select the character which
you want to change
Change the character
Insert one character
Delete one character
Turn the [ ] knob to select the ( at the right
5.
edge of the screen, and then press the [ ] knob to
confirm.
The settings are saved.
NOTE
Never turn off the power or disconnect the USB flash drive while
the screen indicates "Executing... "
6.
Press the [ ] button to exit function mode.
The [ ] button goes dark.
22
Setting Page
Temperament p. 17
Temperament Key p. 17
Hammer Response
p. 17
Piano Tone settings
p. 18
Volume Limit p. 26
Turn the [ ] knob
Press the [ ] knob (confirm)
/
Turn the [ ] knob (change the
character)
/
Press the [ ] knob (back)
Press the [ s ] button
Press the [ 7 ] button

Loading Piano Settings (Piano Setup Import)

1.
Connect your USB flash drive to the USB Memory
port.
2.
Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
3.
Turn the [ ] knob to access "Piano Setup Import"
screen, and then press the [ ] knob.
The Piano Setup Import screen appears.
4.
Turn the [ ] knob to select the piano settings that
you want to load.
5.
Press the [ ] knob to confirm.
A confirmation message appears.
If you decide to cancel, press the [ ] button.
6.
Turn the [ ] knob to select "Yes," and press the [ ]
knob to confirm.
The settings are loaded.
NOTE
Never turn off the power or disconnect the USB flash drive while
the screen indicates "Executing... "
7.
Press the [ ] button to exit function mode.
The [ ] button goes dark.