Reading The Performance Data From A Memory Card ~ Load - Roland KR-3500 Owner's Manual

You can cancel
load procedure by
pressing (EXIT }
If you press (PLAY }
instead of
in step @), the Song
will automatically
start playback as
soon as the data
has been loaded.
5, Reading the Performance data
from a Memory Card~Load
Loading is the process of reading the Song data or User Program data stored on a Memory Card back into
the internal memory of the KR-3500. After loading the data, you can play it back or re-record it with the
Composer.
Fam Mer-vellale Moreyare Mel: )t-|
You need to load Song data on a Memory card back into the intemal memory. After the data has been
loaded, you're ready to playback or re-record it with the Composer.
Operation
From the Master Screen :
@) Insert the appropriate Memory Card into the CARD slot.
Be sure to insert the Card properly; face-side up.
(2) Press (LOAD) and the following screen will appear :
LOAD
If you press (LOAD ) and the Card doesn't contain any Song data, you'll see one of the following
screens :
In this case, press (EXIT } Insert the proper Memory Card and then perform the load operation again.
@) Press CENTER } and the Song load will begin immediately.
EXIT ENTER
a
84