Setup - Toro Reelmaster 5510-D Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Cutting performance paper
Shim
Note:
Determine the left and right sides of the machine from the normal operating position.
Description
No parts required
No parts required
Right, front hose guide
Left, front hose guide
No parts required
Cutting-unit kickstand
Warning decal
Qty.
–
–
1
1
–
1
1
Qty.
1 Read the Operator's Manual before operating the machine.
1 Read the manual before operating the engine.
1 Adjust the cutting-unit bedknife to reel.
1 Adjust the cutting-unit bedknife to reel.
9
Use
Adjust the tire pressure.
Adjust the control-arm position.
Install the cutting units.
Adjust the turf-compensation spring.
Install the cutting-unit kickstand.
Replace the decal for CE compliance.
Use