Product Overview; Controls - Toro Reelmaster 5510-D Operator's Manual

Product Overview

Figure 17
1. Engine hood
2. Seat
3. Control arm
4. Steering wheel

Controls

Seat-Adjusting Knobs
The seat-adjusting lever allows you to adjust
the seat forward and rearward
weight-adjusting knob adjusts the seat for your weight.
The weight gauge indicates when the seat is adjusted
to your weight. The height-adjusting knob adjusts the
seat for your height.
Figure 18
1. Weight gauge
2. Weight-adjusting knob
g216864
5. Seat adjustments
6. Front cutting units
7. Rear cutting units
(Figure 18). The
g003954
3. Height-adjusting knob
4. Adjusting lever
Traction Pedal
The traction pedal controls the forward and reverse
operation (Figure 19). Press the top of the pedal
to move forward and the bottom to move rearward.
Ground speed depends on how far you press the
pedal. For no load, maximum ground speed, set the
engine speed to the F
pedal.
To stop, reduce foot pressure on the traction pedal
and allow it to return to the center position.
1. Traction pedal
2. Mow-speed limiter
3. Spacers
Mow-Speed Limiter
When the mow-speed limiter is flipped up, it controls
the mow speed and allows the cutting units to be
engaged (Figure 19). Each spacer adjusts the
mowing speed by 0.8 km/h (0.5 mph). The more
spacers you have on the top of the bolt, the slower the
mowing speed. To transport the machine, flip back the
mow-speed limiter for the maximum transport speed.
Brake Pedal
Press the brake pedal to stop the machine
Parking Brake
To engage the parking brake, push down on the brake
pedal and press the top forward to latch
To release the parking brake, press the brake pedal
until the parking-brake latch retracts.
16
position and fully press the
AST
Figure 19
4. Brake pedal
5. Parking brake
6. Tilt-steering pedal
(Figure
(Figure
g003955
19).
19).