Checking The Fuel Lines And Connections; Fuel Pick-Up Tube Screen; Electrical System Maintenance; Electrical System Safety - Toro Reelmaster 5510-D Operator's Manual

Checking the Fuel Lines
and Connections
Service Interval: Every 400 hours (Or yearly,
whichever comes first).
Check the fuel lines and connections for deterioration,
damage, or loose connections.

Fuel Pick-up Tube Screen

The fuel pick-up tube, located inside the fuel tank, is
equipped with a screen to help prevent debris from
entering the fuel system. Remove the fuel pick-up
tube and clean screen as required.
Electrical System
Maintenance
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to
the State of California to cause
cancer and reproductive harm. Wash
hands after handling.
Important:
Before welding on the machine,
disconnect both cables from the battery, both wire
harness plugs from the electronic control module,
and the terminal connector from the alternator to
prevent damage to the electrical system.

Electrical System Safety

•
Disconnect the battery before repairing the
machine. Disconnect the negative terminal first
and the positive last. Connect the positive terminal
first and the negative last.
•
Charge the battery in an open, well-ventilated
area, away from sparks and flames. Unplug the
charger before connecting or disconnecting the
battery. Wear protective clothing and use insulated
tools.

Servicing the Battery

Service Interval: Every 50 hours—Clean the battery
and check the condition of it (or
weekly, whichever comes first).
Every 50 hours—Check the battery-cable
connections.
DANGER
Battery electrolyte contains sulfuric acid,
which is fatal if consumed and causes severe
burns.
• Do not drink electrolyte and avoid contact
with skin, eyes, or clothing. Wear safety
glasses to shield your eyes and rubber
gloves to protect your hands.
• Fill the battery where clean water is always
available for flushing the skin.
56
WARNING