Figure 9. Vtrak Serial Connector - Intel MFSYS25 Connection Manual

Modular server system to promise vtrak e-class

Hide thumbs Also See for MFSYS25:

User manual (212 pages)

Install manual (14 pages)

Specification (59 pages)

Table Of Contents

Table of Contents

2. Attach the DB9 end of the serial data cable to a serial port on the PC.

Accessing the VTrak's CLI

To access the VTrak's CLI:

1. Change your terminal emulation program settings to match the following

specifications:

— Bits per second: 115200

— Data bits: 8

— Parity: None

— Stop bits: 1

— Flow control: none

2. Start your PC's terminal VT100 or ANSI emulation program.

3. Press Enter once to launch the CLI.

4. At the Login prompt, type administrator and press Enter.

5. At the Password prompt, type password and press Enter.

At this point, you are in the CLI.

6. To view the IP address, type net and press Enter.

administrator@cli> net

========================================================

CId Port

========================================================

In this example, the VTrak's IP virtual address is 192.168.10.85. Use this address to log

into WebPAM PROe.

Intel

Modular Server System MFSYS25 to Promise* VTrak E-Class Connection Guide

Mgmt