Cessna 172SPHUSR05 Pilot Operating Handbook page 402

S ECTION 9 - SU PPLEM ENTS
S U PPLEM E NT 1 5 - FAA A P PROVED
BENDIX/KING
U I\. r: I AP I n .
KAP 140
" v LJ
•
P R
KAP 1 40 WITH ALTITUDE PRESELECT
Numbered items apply to the KAP 1 40 with Altitude
Preselect. Other controls and indicators shown are
the same as those on the KAP 1 40 without Altitude
Preselect (refer to Figure 2) .
1 . ROTARY KNOBS -- Used to set the altitude alerter
reference altitude; or may be used immediately after
pressing the BARO button, to adjust the autopilot baro
setting to match that of the airplane's altimeter when m anual
adjustment is requ i red. ( I n some systems, the baro setting
may be automatically synched to that of the altim eter. )
2 . BARO S ET (BARO)
released , will change the display from the altitude alerter
selected altitude to the baro setting display (either IN HG or
H PA) for 3 seconds. If pushed and held for 2 seconds, will
change the baro setting display from IN HG to H PA or vice
versa.
knobs may be used to adjust the baro setting.
I
Figure 3. Bendix/King 2-Axis KAP 1 40 Autopilot with Altitude
Preselect, Operating Controls and I ndicators (Sheet 1 of 2)
P
T ....
T
il L. .
NOTE
B UTTON
Once the baro setting display is visible the rotary
4
5
ALERT FT
-- When pushed and
C ESSNA
MOD EL 1 72S
2
3
ON