Switching Chord Sets - Roland JUNO-D Owner's Manual

■ Switching chord sets

Then, try to change chord sets.
fig.q04-10
3.
Use VALUE [-]/[+] to select a Chord Set.
The user chord set appears after the preset chord sets.
4.
When you press [EXIT], the Multi-chord Memory function will remain on
and you will return to the previous screen.
If you want to select a chord set once again, press [CHORD MEMORY] so it goes out,
and then press [CHORD MEMORY] once again so it is lit.
The selected chord set remains stored in memory even while the power is off.
5.
To turn off the Multi-chord Memory function, press [
again so the indicator goes out.
You can create your own chord set by saving chords you have created.
For further information, refer to Creating an original chord set (User Chord Set)
(p. 64).
5 3 4
]
CHORD MEMORY
Try out the sounds
Multi-chord set list (p.
122)
25