Roland JUNO-D Owner's Manual page 79

26: GATED REVERB
Gate Reverb is a special type of reverb in which the reverberant
sound is cut off before its natural length.
fig.MFX-26
L in
Balance D
Gated Reverb
R in
Balance D
Parameter Value
Type NORMAL,
REVERSE,
SWEEP1,
SWEEP2
Pre Delay 0.0–100 [ms]
Gate Time 5–500 [ms]
Low Gain -15– +15 [dB]
High Gain -15– +15 [dB]
Balance # D100:0W–
D0:100W
Level # 0–127
27: OD>CHORUS
→
(Overdrive Chorus)
This effect connects an overdrive and a chorus in series.
fig.MFX-27
L in
Balance D
Overdrive Chorus
R in
Balance D
Parameter Value
OD Drive 0–127
OD Pan # L64–63R
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Selects the type of reverb.
NORMAL: conventional gate re-
verb
REVERSE: backwards reverb
SWEEP1: the reverberant sound
moves from right to left
SWEEP2: the reverberant sound
moves from left to right
Adjusts the time delay from
when the direct sound begins
until the reverb sound is heard.
Adjusts the time from when the
reverb is heard until when it dis-
appears.
Adjusts the gain of the low fre-
quency.
Adjusts the gain of the high fre-
quency.
Adjusts the volume balance be-
tween the direct sound and the
reverb sound.
With a setting of D100:0W only the
direct sound will be output, and
with a setting of D0:100W only the
reverb sound will be output.
Adjusts the output level.
L out
Balance W
Balance W
R out
Description
Adjusts the degree of overdrive
distortion.
The volume will change togeth-
er with the degree of distortion.
Adjusts the stereo location of the
overdrive sound.
L64 is far left, 0 is center, and
63R is far right.
Parameter Value
Cho Delay 0.0–100 [ms]
Cho Rate 0.05–10.00 [Hz] Adjusts the modulation speed of
Cho Depth 0–127
Cho Balance # D100:0W–
D0:100W
Level 0–127
28: OD>FLANGER
→
(Overdrive Flanger)
This effect connects an overdrive and a flanger in series.
fig.MFX-28
L in
Overdrive
R in
Parameter Value
OD Drive 0–127
OD Pan # L64–63R
Flg Delay 0.0–100 [ms]
Flg Rate 0.05–10.00 [Hz] Adjusts the modulation speed of
Flg Depth 0–127
Flg Feedback -98– +98 [%]
Adding effects
Description
Adjusts the time delay from
when the direct sound begins
until the chorus sound is heard.
the chorus effect.
Adjusts the modulation depth of
the chorus effect.
Adjusts the volume balance be-
tween the overdrive sound that
is sent through the chorus and
the overdrive sound that is not
sent through the chorus.
With a setting of "D100:0W,"
only the overdrive sound will be
output. With a setting of
"D0:100W," only the overdrive
sound that is sent through the
chorus will be output.
Adjusts the output level.
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Description
Adjusts the degree of overdrive
distortion.
The volume will change togeth-
er with the degree of distortion.
Adjusts the stereo location of the
overdrive sound.
L64 is far left, 0 is center, and
63R is far right.
Adjusts the time delay from
when the direct sound begins
until the flanger sound is heard.
the flanger effect.
Adjusts the modulation depth of
the flanger effect.
Adjusts the proportion (%) of
the flanger sound that is fed
back into the effect.
Negative (-) settings will invert
the phase.
79