Roland JUNO-D Owner's Manual page 83

38: CHO>FLANGER (Chorus
This effect connects a chorus and a flanger in series.
fig.MFX-38
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Cho Delay 0.0–100 [ms]
Cho Rate 0.05–10.00 [Hz] Adjusts the modulation speed of
Cho Depth 0–127
Cho Balance # D100:0W–
D0:100W
Flg Delay 0.0–100 [ms]
Flg Rate 0.05–10.00 [Hz] Adjusts the modulation speed of
Flg Depth 0–127
Flg Feedback -98– +98 [%]
Flg Balance # D100:0W–
D0:100W
Level 0–127
39: CHORUS/DELAY
This effect connects a chorus and a delay in parallel. The parameters
are the same as for "36: CHORUS>DELAY." However, the Dly
Balance parameter adjusts the volume balance between the direct
sound and the delay sound.
fig.MFX-39
L in
Chorus
Feedback
Delay
R in
→
Flanger)
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Description
Adjusts the time delay from
when the direct sound begins
until the chorus sound is heard.
the chorus effect.
Adjusts the modulation depth of
the chorus effect.
Adjusts the volume balance be-
tween the direct sound and the
chorus sound.
With a setting of "D100:0W," only
the direct sound will be output.
With a setting of "D0:100W," only
the chorus sound will be output.
Adjusts the time delay from
when the direct sound begins
until the flanger sound is heard.
the flanger effect.
Adjusts the modulation depth of
the flanger effect.
Adjusts the proportion (%) of
the flanger sound that is fed
back into the effect.
Negative (-) settings will invert
the phase.
Adjusts the volume balance be-
tween the chorus sound and the
chorus sound that is passed
through the flanger.
With a setting of "D100:0W," only
the chorus sound will be output.
With a setting of "D0:100W," only
the chorus sound that passes
through the flanger will be output.
Adjusts the output level.
Balance D
L out
Balance W
Balance W
R out
Balance D
40: FLG/DELAY (Flanger/Delay)
This effect connects a flanger and a delay in parallel. The parameters
are the same as for "37: FLG>DELAY." However, the Dly Balance
parameter adjusts the volume balance between the direct sound and
the delay sound.
41: CHO/FLANGER (Chorus/
Flanger)
This effect connects a chorus and a flanger in parallel. The
parameters are the same as for "38: CHO>FLANGER." However, the
Flanger Balance parameter adjusts the volume balance between the
direct sound and the flanger sound.
fig.MFX-41
L in
Chorus
Feedback
Flanger
R in
42: LOFI
This effect intentionally degrades the audio quality to simulate a Lo-
Fi sound. It is particularly effective on drums.
fig.MFX-42
L in 2-Band EQ
Lo-Fi
R in
Lo-Fi
2-Band EQ
Parameter Value
Bit Down 0–11
S-RateDown 0–7
Post Gain 0, +6, +12, +18
[dB]
Low Gain -15– +15 [dB]
High Gain -15– +15 [dB]
Output MONO, STE-
REO
Level # 0–127
Adding effects
Balance D
L out
Balance W
Balance W
R out
Balance D
L out
R out
Description
This setting lowers the audio
quality.
The audio quality will worsen as
this setting is increased.
This coarsens the output signal.
The sound will become coarser
as this setting is increased.
Adjusts the output signal.
Adjusts the gain of the low fre-
quency.
Adjusts the gain of the high fre-
quency.
Specifies how the sound will be
output.
With a setting of "MONO," the
output sound will be monaural.
Specifies the output volume
from the Lo-Fi effect.
83