Table of Contents
Advertisement
Switching Registrations
Switching Registration Sets
A Registration Set contains 4 banks (A–D). You can create 8
Registration Sets, meaning that 8 Registrations x 4 banks x 8 sets =
256 Registrations are available.
Here's how to switch the Registration Set so that you can select
other banks.
Set 8
Set 1
Bank
(A–D)
You can use the [NEXT] button and [PREV] button to switch
Registration Sets.
1.
Set the system parameter "Registration Next/Prev Button"
(p . 86) to "REGISTRATION SET . "
MEMO
With the factory settings, Registration Next/Prev Button is set to
"REGISTRATION SET. "
2.
Press the [NEXT] button or [PREV] button .
Pressing the [NEXT] button switches to the next Registration Set;
pressing the [PREV] button switches to the previous Registration
Set.
The display indicates the Registration Set that's selected.
Registration Set
MEMO
• If "Registration Next/Prev Button" (p. 86) is set to "REGISTRATION, "
you can also switch Registration Sets by holding down the
[SHIFT] button and pressing the [PREV] button or [NEXT] button.
• You can use the "Registration Exchange" function (p. 82) to swap
entire sets of Registrations.
42
Registration (1–8)
Switching Registrations
Consecutively
Here's how to switch Registrations consecutively.
1.
Set the system parameter"Registration Next/Prev Button"
(p . 86) to "REGISTRATION . "
MEMO
If you decide not to switch banks, press the [EXIT] button or the
bank button that's blinking.
2.
Press the [NEXT] button or [PREV] button .
Pressing the [NEXT] button steps you through the Registrations in
the following order.
Set 1
Set 2
Set 8
MEMO
Pressing the [PREV] button steps you through the Registrations
in the opposite order.
Advertisement
Table of Contents
