Accent Rate (Arpeggio Accent Rate); Shuf Rate (Arpeggio Shuffle Rate); Shuf Resolution (Arpeggio Shuffle Resolution); Hold (Arpeggio Hold Switch) - Roland JUNO-D Owner's Manual

For a phrase template, this setting will be "PHRASE."

Accent Rate (Arpeggio Accent Rate)

Modifies the strength of accents and the length of the notes to adjust
the "groove" feel of the arpeggio. A setting of "100%" will produce
the most pronounced groove feel.
Value: 0–100%

Shuf Rate (Arpeggio Shuffle Rate)

This setting lets you modify the note timing to create shuffle
rhythms.
With a setting of "50%" the notes will be spaced evenly. As the value
is increased, the note timing will have more of a "dotted" (shuffle)
feel.
Value: 0–100%
fig.r06-26
Shuffle Rate = 50% Shuffle Rate = 90%
50 50 50 50
90

Shuf Resolution (Arpeggio Shuffle Resolution)

A "shuffle" feel is produced by delaying the even-numbered beats
(beats 2, 4, 6,...). You can select either 16th notes or 8th notes to be
affected by this delay.
Value: ,

Hold (Arpeggio Hold Switch)

Switch between Hold On/Hold Off for the Arpeggiator
performance.
Value: OFF, ON

Kbd Velocity (Arpeggio Keyboard Velocity)

Specifies the loudness of the notes that you play.
If you want the velocity value of each note to vary depending on
how strongly you play the keyboard, set this parameter to "REAL."
If you want each note to have a fixed velocity regardless of how
strongly you play the keyboard, set this parameter to the desired
value (1–127).
Value: REAL, 1–127

Octave Range (Arpeggio Octave Range)

Sets the key range in octaves over which arpeggio will take place. If
you want the arpeggio to sound using only the notes that you
actually play, set this parameter to "0." To have the arpeggio sound
using the notes you play and notes 1 octave higher, set this
parameter to "+1." A setting of "-1" will make the arpeggio sound
using the notes you play and notes 1 octave lower.
-3–+3
Value:

Key Trigger (Arpeggio Key Trigger)

Turn this "ON" if you want the arpeggio to start at the moment that
you press the key. If you want the arpeggio to start playing in
synchronization with Rhythm guide or the external sequencer, turn
this "OFF."
OFF, ON
Value:
10 90 10
Using the phrase/arpeggio function
63