Page 2
DN-95104, the high power single port active PoE injector with detection chip inside. It output 60w for high power PD though 8 lines. It support 10/100/1000Mbps network environment. DN-95104 supply power for PoE standard terminal equipment, such as the high power Base station, wireless Access Point, Network Camera etc.
Page 3
MAIN SPECIFICATION Provide power with detection chip Output power 60W Output current 1.1A Power pin:4/5(+),7/8(-) and 3/6(+),1/2(-) Small size, high-power, lower cost. Support power for IEEE802.3af/IEEE802.3at terminal equipment Support power for no-IEEE802.3af/IEEE802.3at terminal equipment OUTLINE DRAWING...
SPECIFICATIONS Standards IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet Support 10/100/1000Base-T LAN Support IEEE802.3af/IEEE802.3at standard terminal equipment Support Non-IEEE802.3af/IEEE802.3at standard terminal RoHS Compliant WEEE Compliant, CE/FCC FCC Part 15,Class B EN 55022 Class B ...
Page 5
APPLICATION PICTURE Package info. DN-95104, Power cable * 1, User Manual *1 Note: If wrongly installed or improperly used in the living area, the device can cause interference in radios and other electronic devices. Appropriate use is when the device, as far as feasible, is operated with shielded connection cables (with network products in addition to category 5 shielded cables and higher).
Need help?
Do you have a question about the DN-95104 and is the answer not in the manual?
Questions and answers