Delivery Check; Before Installation; Requirements For The Installation Site; Floor - ABB ACS800-U4 Hardware Manual

36

Delivery check

Check that there are no signs of damage. Before attempting installation and
operation, check the information on the type designation label of the drive to verify
that the unit is of the correct type. The label includes IEC rating, C-UL US, CSA,
C-tick and CE markings, a type code and a serial number, which allow individual
recognition of each unit. The first digit of the serial number refers to the
manufacturing plant. The next four digits refer to the unit's manufacturing year and
week, respectively. The remaining digits complete the serial number so that there
are no two units with the same serial number.
The type designation label is attached to the heat sink and the serial number label to
the upper part of the back plate of the unit.
Type designation label
Serial number label

Before installation

Check the installation site according to the requirements below. See
drawings

Requirements for the installation site

See Technical data

Floor

The floor/material below the cabinet should be non-flammable.
Mechanical installation
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
for frame details.
for the allowed operation conditions of the drive.
Dimensional