Product And Service Inquiries; Product Training; Providing Feedback On Abb Drives Manuals - ABB ACS800-U4 Hardware Manual

20
Connect the power cables.
Connect the control and the auxiliary control cables.
Check the installation.
Commission the drive.
Commission the optional brake chopper (if present).
Operating of the drive: start, stop, speed control etc.

Product and service inquiries

Address any inquiries about the product to your local ABB representative, quoting
the type code and serial number of the unit in question. A listing of ABB sales,
support and service contacts can be found by navigating to ABB website and
selecting Drives – Sales, Support and Service network on the right pane.

Product training

For information on ABB product training, navigate to ABB website and select
Drives – Training courses on the right pane.

Providing feedback on ABB Drives manuals

Your comments on our manuals are welcome. Go to ABB website, then
select successively Drives – Document Library – Manuals feedback form on the right
pane.
About this manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Task See
Electrical installation, Motor control and I/O
board (RMIO), Resistor braking
the optional module manual delivered with the
module.
Installation checklist
Appropriate Firmware Manual
Resistor braking
Appropriate Firmware Manual
(optional) and